Skip to main content

Silva Global

In our previous post, we introduced Egcodorn® Lock and its performance advantages, particularly in post-tensioned slabs under 210 mm thick. Now, let’s look at what sets it apart where it counts just as much, on the construction site and over the life of the building.

Simpler Installation, Fewer Moving Parts

One of the most common pain points with conventional temporary movement joints (TMJ) systems is installation complexity. Multi-component assemblies with longer sleeves mean more handling, more alignment steps, and more opportunities for things to go wrong, particularly in congested or thin slabs where tolerances are tight.

Egcodorn® Lock takes a different approach. With fewer components and a straightforward formwork-fixing process, installation is simplified and sequencing is reduced. There are no complex multi-part assemblies to coordinate on site.

Grouting is equally efficient. Each unit requires approximately 700 ml of standard PT grout, and up to four units can be linked for grouting in a single operation. Grouting effort scales proportionally with unit count rather than being compounded by sleeve length.

For contractors working on tight programmes or repetitive floor plates, this simplicity translates directly into faster cycle times and reduced site risk.

All-Steel Load Path: No Polymer in the Joint Zone

Where many conventional TMJ systems rely on a steel dowel housed within a plastic sleeve, Egcodorn® Lock is fundamentally different. Its load path is all-steel by design: a 316 stainless steel dowel within a steel sleeve housing in the joint zone.

There are no plastic or polymer components in the load-bearing or cover zone. The load transfer mechanism is steel-to-steel, with grouting providing system locking, durability, and full fire performance.

This distinction matters. An all-steel load path removes any reliance on polymer components for structural integrity, giving designers and contractors confidence in long-term performance without dependence on grout cover to protect non-metallic elements.

Fire Performance You Can Count On

Fire engineering scrutiny on construction projects continues to increase, and the materials within movement joints deserve attention.

Conventional TMJ systems that incorporate plastic sleeves or sealing components in the joint zone introduce polymer materials into the fire-exposed zone. Their performance under heat relies on the integrity of the surrounding grout to protect those components.

Egcodorn® Lock, when grouted, is fully fire-resistant, with no plastic or resin in the load path to soften, melt or compress under heat exposure. Max Frank states its fire exposure performance is equivalent to that of the surrounding concrete structure.

For projects where fire engineering is a key consideration, this is a meaningful point of difference.

Long-Term Durability with 316 Stainless Steel

Durability at movement joints is often a secondary consideration during design, but it shouldn’t be. Conventional systems using carbon steel dowels depend on grout cover and integrity to protect against corrosion over the building’s life.

Egcodorn® Lock uses a 316 stainless steel dowel, offering improved corrosion resistance as a baseline, not as a function of grout condition. For projects with elevated durability requirements or exposure considerations, this provides additional assurance without the need for supplementary protection measures.

Total Installed Cost, Not Just Unit Rate

It’s worth stepping back from the per-unit comparison and looking at the total installed picture. Because each Egcodorn® Lock unit carries more load, particularly in slabs under 210 mm, fewer units may be required along a joint run. Combine that with lower grout volumes, reduced congestion, and faster installation, and the total installed cost advantage becomes clear, even where the unit rate may sit at a premium.

For long TMJ runs in particular, the reduction in total unit quantity is typically the largest cost driver, often outweighing savings from grout or labour alone.

Is Egcodorn® Lock Right for Your Next Project?

Egcodorn® Lock is particularly well suited to, but not limited to, post-tensioned slabs under 210 mm thick. It is also an excellent fit for projects with high reinforcement congestion at movement joints, buildings subject to fire engineering scrutiny or elevated durability requirements, and fast-track programmes where installation efficiency matters.

If you’d like to explore whether Egcodorn® Lock is the right fit for an upcoming project, or if you’d like to walk through the technical details and detailing principles, get in touch with the Silva team. We’d be happy to help.